Change the time in your clock - Knowledge Base

time clocks

Support

Home > Support > Time Change >

FAQ | Changing Time | Updates | Downloads

	TRANZ and ZON Time Clock terminals

Note: Most TRANZ and ZON time clock terminals are using the TC2x firmware application. If yours is using a different version, please contact Support for different instructions

At the Time Clock Terminal:
	Press CLEAR then FUNC/ENTER
		Display = FUNCTION ?
	Press 6
		Display = SETUPS briefly Then = ENTER PASS KEY
	Key your Manager Pass Key followed by FUNC/ENTER
		Display = *3 item rotating menu*
	Press 2
		Display = TERMINAL SETUP briefly Then = OPTION: 0=MENU
	Press 1
		Display = GENERAL SETUP briefly Then = ENTER TIME briefly Then = 24 HOURS HHMM
	Key your correct time followed by FUNC/ENTER
		NOTE: Use 2 digit HOUR and 2 digit MINUTE Use 12~23 for HOUR if it is after noon Use 00 for HOUR if it is between midnight and 1AM Example: 3:30 PM = 1530
	Press CLEAR
		Display = *Corrected Time* (It may take a few moments to update)

© Sundial Time Systems

Sundial Time Systems 1-888-541-8463 | FAQ | Time Clock Software
Time Clocks | Contact Us | Site Map

Anything we can improve? Let us know!