Time Clocks

Software

Support

Home > ... > ... > DST Tranz > DST >

FAQ | Changing Time | Updates | Downloads

	TRANZ and ZON Time Clock

Updating to Version TC28

Important! - This process is intended to retain all your data and settings, however, it is recommended that you collect all your punch information and record your settings prior to beginning.

TC27, TC26, TC25, TC24
	If you have version TC27 - you should update the clock version because it will only work for the November time change. If you have version TC26 - you should update the clock version because it will self adjust automatically according old rules. If you have version TC25 or TC24, updating is optional. If you don't update, the clock will not self adjust and will need to be manually adjusted the way that previous Time Changes were done.
At the Time Clock Terminal:
	Press CLEAR then FUNC/ENTER
		Display = FUNCTION ?
	Press 6
		Display = SETUPS briefly Then = ENTER PASS KEY
	Key your Manager Pass Key followed by FUNC/ENTER
		Display = *3 item rotating menu*
	Press 2
		Display = TERMINAL SETUP briefly Then = OPTION: 0=MENU
	Press 1
		Display = GENERAL SETUP briefly Then = ENTER TIME briefly Then = 24 HOURS HHMM
	Press FUNC/ENTER
		Display = 24HR 1=YES 0=NO
	Press FUNC/ENTER
		Display = MODEM 1=YES 0=NO
	Press FUNC/ENTER
		Display = UPLOAD TIME HHMM
	Press FUNC/ENTER
		Display = UPLOAD PHONE #
	Press FUNC/ENTER
		Display = DOWNLOAD PHONE #
	Enter 1 360 737 0777 followed by FUNC/ENTER
		Spaces are shown for clarity and are not necessary. Remember to use a "1" to dial long distance and add any required digits to access an outside line or permit long distance calls. Use the "-" (dash) character for a 1/2 second pause during the dialing sequence.
		Display = KEYS 1=YES 0=NO
	Press CLEAR then FUNC/ENTER
		Display = FUNCTION ?
	Press 0
		That's a "zero" not "oh"
		Display = DOWNLOAD?
	Press *
		That's an asterisk - the key on the lower left corner
		Display = DIALING Then = WAITING FOR ANSR Then = COMMUNICATING Then = DOWNLOADING Then DOWNLOAD COMPLETE
	That's it! The clock is updated and ready to use. It will return automatically to the idle prompt (date time display) or you can press CLEAR to return to idle immediately. If you have any difficulties please contact our Technical Support.

Anything we can improve? Let us know!

TRANZ and ZON Time Clock

Updating to Version TC28

TC27, TC26, TC25, TC24

TRANZ and ZON
Time Clock