Daylight Savings HandPunch
Updating settings to auto adjust for daylight savings time The HandPunch Time Clocks are capable of self adjusting for Daylight Savings Time. The dates to change must be programmed into the clock each year. When the clocks are shipped from Sundial, they are configured for Daylight Savings Tim ...
Tips for Fingerprint Clocks, Enrollment, Usage and Mantenance
Tips for easy and consistent punching success with a Fingerprint Time Clock Enrolling: 1) If you have small (especially narrow) fingers, use your widest fingers, even your thumb, so that you have the maximum possible contact with the lens 2) When enrolling, place your finger fir ...
Fingerprint clock and Daylight Savings
Updating settings to auto adjust for daylight savings time The Fingerprint Time Clocks are capable of self adjusting for Daylight Savings Time. The dates to change can be programmed into the clock each year. 1) Press "Menu" 1a) Supply a "Supervisor" level finger or password if requ ...
Set or Reset the Time on your Proximity Clock
How to set the time in your Proximity Badge Time Clock1) Access the Menu by pressing the Menu key and, if required, submitting a Supervisor level badge or Supervisor level ID and Passcode 2) Use the Up and Down arrow keys to select the desired menu options 3) Select Options and ...
Set or Reset the Time on your Fingerprint Clock
How to set the time in your Fingerprint Time Clock1) Access the Menu by pressing the Menu key and, if required, submitting a Supervisor level Fingerprint or Supervisor level ID and Passcode 2) Use the Up and Down arrow keys to select the desired menu options 3) Select Options a ...
Configuring Fingerprint Clocks to Collect Department or Job Codes
In order to configure your Fingerprint Clock to collect Department or Job codes during the Punch process, there are a few setting to configure 1) Configure the clock to request the information from the employee 2) Instruct RealTime Communications what to do with the information that the employee ...
Set or Reset the time on your HandPunch Time Clock
***In order to complete this process you must be enrolled into the Hand Punch clock as a Supervisor*** Press CLEAR then ENTER on the clock Key in your Card ID number and press ENTER Place your hand on the platen for verification Upon successful verification you will see a messa ...
Changing the Date in Zon/Tranz type Clock
These steps will allow you to change both the date and the time in your clock. typically this is only used when the clock is set for the wrong date. Step 1.) At the clock keypad, press the "*" and "3" at the same time, the screen will display "DIAGNOSTICS". Step 2.) Press the button on the bot ...
Set or Reset the time on your Tranz Model Time Clock
When setting or resetting the time on your TRANZ model time clock, you will need to know which RealTime Software you are using RealTime Advanced software (version 3.0, 3.1 and 3.5) 1) Press CLEAR then FUNC/ENTER then 6 2) Supply the correct passcode (Default =1234) and press FUNC/ENT ...
Set or Reset the time on your Tranz Model Time Clock
When setting or resetting the time on your TRANZ model time clock, you will need to know which RealTime Software you are using RealTime Advanced software (version 3.0, 3.1 and 3.5) 1) Press CLEAR then FUNC/ENTER then 6 2) Supply the correct passcode (Default =1234) and press FUNC/EN ...
Fingerprint clock: Success rate of positive match
Q: Everyone in our office can walk in and touch in at the fingerprint time clock just once and they are clocked in. I've never had to "try again", ever. But we have one person who for some reason has to try 2 or 3 times almost every morning. Is there any reason for a poorer recognition rate on j ...
Checking in-out status from the clock
Q: Say an employee is punching in and out frequently, either due to an odd schedule or personal time needed - breaking up the day's schedule with several interruptions; Is there an easy way for employees to check their in-out status from the clock, so that they will know if they have forgotten t ...
Finger Print Menu operations:
Employee Enrollment: To enroll a users fingerprint, begin by pressing MENU, then press ok at the USER MANAGE prompt, OK again for ENROLL USER, OK for ENROLL FP, then OK again at the “New Enroll?” question. Now key in the user's Badge ID at the USER ID prompt and then ...
Daylight Savings ATS Time Clock:
There are 2 Models of ATS Time Clocks, the E-Series and the Cyber Series. To determine which Time Clock model you have, click here. E-Series E-series terminals automatically adjust their time based on a date you send to the terminal. Use the ATS Configuration screen of your Real ...
Daylight Savings PCTimeClock Lite:
If you work in an area that observes Daylight Saving Time and your company uses the Internet Time Source option of PC Time Clock then you should be using version 2.0.12 or higher to comply with the revised Daylight Saving Time rules. To determine which version you currently have, click the y ...
Daylight Savings Zon/Tranz: Updating to Version TC28
Important! - This process is intended to retain all your data and settings, however, it is recommended that you collect all your punch information and record your settings prior to beginning. TC27, TC26, TC25, TC24 If you have version TC27 - you should update the clock version b ...
Search the Knowledgebase
Browse by Category
