time clocks
Time Clocks
Software
Support
Contact Us      
Home > Support >FAQ > FAQ | Electronic Time Clock | Updates | Downloads
Sundial Support Help Center

Knowledgebase Home | Glossary | Favorites | Login Knowledgebase Home | Glossary | Favorites | Login
Search the Knowledgebase Browse by Category
Daylight Savings Zon/Tranz: Updating to Version TC28
Article Details

Last Updated
7th o May, 2008




Important! - This process is intended to retain all your data and settings, however, it is recommended that you collect all your punch information and record your settings prior to beginning.

TC27, TC26, TC25, TC24

  If you have version TC27 - you should update the clock version because it will only work for the November time change.

If you have version TC26 - you should update the clock version because it will self adjust automatically according old rules.

If you have version TC25 or TC24, updating is optional. If you don't update, the clock will not self adjust and will need to be manually adjusted the way that previous Time Changes were done.


At the Time Clock Terminal:
  Press CLEAR then FUNC/ENTER
   Display = FUNCTION ?
  Press 6
   Display = SETUPS briefly
Then = ENTER PASS KEY ------->(the default pass is 1234)
  Key your Manager Pass Key followed by FUNC/ENTER
   Display = 3 item rotating menu
  Press 2
   Display = TERMINAL SETUP briefly
Then = OPTION: 0=MENU
  Press 1
   Display = GENERAL SETUP briefly
Then = ENTER TIME briefly
Then = 24 HOURS HHMM
  Press FUNC/ENTER
   Display = 24HR 1=YES 0=NO
  Press FUNC/ENTER
   Display = MODEM 1=YES 0=NO
  Press FUNC/ENTER
   Display = UPLOAD TIME HHMM
  Press FUNC/ENTER
   Display = UPLOAD PHONE #
  Press FUNC/ENTER
   Display = DOWNLOAD PHONE #
  Enter 1 360 737 0777 followed by FUNC/ENTER
   Spaces are shown for clarity and are not necessary. Remember to use a "1" to dial long distance and add any required digits to access an outside line or permit long distance calls.
Use the "-" (dash) character for a 1/2 second pause during the dialing sequence.
   Display = KEYS 1=YES 0=NO
  Press CLEAR then FUNC/ENTER
   Display = FUNCTION ?
  Press 0
   That's a "zero" not "oh"
   Display = DOWNLOAD?
  Press *
   That's an asterisk - the key on the lower left corner
   Display = DIALING
Then = WAITING FOR ANSR
Then = COMMUNICATING
Then = DOWNLOADING
Then DOWNLOAD COMPLETE
  That's it! The clock is updated and ready to use. It will return automatically to the idle prompt (date time display) or you can press CLEAR to return to idle immediately.

If you have any difficulties please contact our Technical Support.

Visitor Comments
No visitor comments posted. Post a comment
Post Comment for "Daylight Savings Zon/Tranz: Updating to Version TC28"
To post a comment for this article, simply complete the form below. Fields marked with an asterisk are required.
   Your Name:
   Email Address:
* Your Comment:
* Enter the code below:
 
Related Articles
No related articles were found.
Attachments
No attachments were found.

Sundial Employee Time Clock selection
        © 2008 Sundial Time Systems, all rights reserved.