Updating settings to auto adjust for daylight savings time

The Fingerprint Time Clocks are capable of self adjusting for Daylight Savings Time. The dates to change can be programmed into the clock each year.

    1) Press "Menu"
        1a) Supply a "Supervisor" level finger or password if requested
    2) Select "Options" and press OK
    3) Select "System Opt" and press OK
    4) Select "DLST" and press OK
Note: If DLST is set to "Y", Skip to step 8
    5) If DLST is set to "N"
    6) Select DLST and press OK
    7) Use the arrows to select "Y" and press OK

Note: If Date Mode is already set for Mode1, Skip to step 13
    8) Select "Date Mode" and press OK
    9) Use the Arrows to set to "Mode1" and press OK
    10) Press ESC
    11) Press OK when prompted to "Save ?"
    12) Select "DLST" again and press OK
    13) Select "Enter DLST" and press OK
Note: Spring Change to Daylight Saving Time in 2011 is March 13.
    14) Using the Arrow keys to navigate, enter 3, 13, 2, 0 into the 4 fields and press OK
    15) Select "Standard" and press OK
Note: Fall Change to Standard Time in 2011 is November 6th.
    16) Using the Arrow Keys to navigate, enter 11, 6, 2, 0 into the 4 fields and press OK
    17) Press ESC
    18) Press OK when prompted to "Save ?"
    19) Press ESC until menu is exited